Optimizing the Optoelectronic Properties of Face-On Oriented Poly(3,4-Ethylenedioxythiophene) via Water-Assisted Oxidative Chemical Vapor Deposition

Engineering the texture and nanostructure to improve the electrical conductivity of semicrystalline conjugated polymers must address the rate-limiting step for charge carrier transport. In highly face-on orientation, the charge transport between chains within a crystallite becomes rate-limiting, which is highly sensitive to the π–π stacking distance and interchain charge transfer integral. Here, face-on oriented semicrystalline poly(3,4-ethylenedioxythiophene) (PEDOT) thin films are grown via water-assisted (W-A) oxidative chemical vapor deposition (oCVD). Combining W-A with the volatile oxidant, antimony pentachloride, yields an optimized electrical conductivity of 7520  ±  240 S cm⁻¹, a record for PEDOT thin films. Systematic control of π–π stacking distance from 3.50 Å down to 3.43 Å yields an electrical conductivity enhancement of ≈ 1140%. The highest electrical conductivity also corresponds to minimum in Urbach energy of 205 meV, indicating superior morphological order. The figure of merit for transparent conductors, σ_dc/σ_op, reaches a maximum value of 94, which is 1.9 × and 6.7 × higher than oCVD PEDOT grown without W-A and utilizing vanadium oxytrichloride and iron chloride oxidizing agents, respectively. The W-A oCVD is single-step all-dry process and provides conformal coverage, allowing direct growth on mechanical flexible, rough, and structured surfaces without the need for complex and costly transfer steps.     

Timeout Period Analysis to Detect Black Hole Attack in Multihop Wireless Ad Hoc Networks

A novel approach is proposed to estimate the timeout period used in wireless ad hoc networks in order to detect misbehaving nodes that make black hole attacks. Timeout period is an acceptable time frame for a node to forward a packet and is used to judge if the node is behaving properly. To avoid misjudgment and false alarms, the accuracy of the estimate of the timeout period is very important. Our method is based on the IEEE 802.11 MAC protocol and Dynamic Source Routing protocol. The main contribution of this paper is proposing a queuing analysis to calculate the mean and maximum delay per hop implementing the 95-percentile of medium access waiting time. In addition, a new technique is introduced that can be applied to determine the mean number of hops in flooding-based ad hoc networks, taking into account edge effects. For each proposed model, analytical results are compared with results obtained from simulations and the validity of the models is confirmed by observing the close relationship between the results.     

Phase Transformation Kinetics During Annealing of Cold-Rolled AISI 309Si Stainless Steel

Metallurgical and Materials Transactions A - The effects of cold rolling and the subsequent annealing were studied for the AISI 309Si stainless steel. During annealing of cold-rolled sheets, the...     

Weighted label propagation based on Local Edge Betweenness

The Journal of Supercomputing - In complex networks, especially social networks, networks could be divided into disjoint partitions. However, nodes could be partitioned such that the number of...     

From 2D to 3D geodesic-based garment matching

Multimedia Tools and Applications - A new approach for 2D to 3D garment retexturing is proposed based on Gaussian mixture models and thin plate splines (TPS). An automatically segmented garment of...     

Application of shifted Jacobi pseudospectral method for solving (in)finite-horizon min–max optimal control problems with uncertainty

The difficulty of solving the min–max optimal control problems (M-MOCPs) with uncertainty using generalised Euler–Lagrange equations is caused by the combination of split boundary conditions, nonlinear differential equations and the manner in which the final time is treated. In this investigation, the shifted Jacobi pseudospectral method (SJPM) as a numerical technique for solving two-point boundary value problems (TPBVPs) in M-MOCPs for several boundary states is proposed. At first, a novel framework of approximate solutions which satisfied the split boundary conditions automatically for various boundary states is presented. Then, by applying the generalised Euler–Lagrange equations and expanding the required approximate solutions as elements of shifted Jacobi polynomials, finding a solution of TPBVPs in nonlinear M-MOCPs with uncertainty is reduced to the solution of a system of algebraic equations. Moreover, the Jacobi polynomials are particularly useful for boundary value problems in unbounded domain, which allow us to solve infinite- as well as finite and free final time problems by domain truncation method. Some numerical examples are given to demonstrate the accuracy and efficiency of the proposed method. A comparative study between the proposed method and other existing methods shows that the SJPM is simple and accurate.     

Nanoethosomal formulation of gammaoryzanol for skin-aging protection and wrinkle improvement: a histopathological study

Background: Free radical scavengers and antioxidants, with the main focus on enhanced targeting to the skin layers, can provide protection against skin ageing.

Objective: The aim of the present study was to prepare nanoethosomal formulation of gammaoryzanol (GO), a water insoluble antioxidant, for its dermal delivery to prevent skin aging.

Methods: Nanoethosomal formulation was prepared by a modified ethanol injection method and characterized by using laser light scattering, scanning electronic microscope (SEM) and X-ray diffraction (XRD) techniques. The effects of formulation parameters on nanoparticle size, encapsulation efficiency percent (EE%) and loading capacity percent (LC%) were investigated. Antioxidant activity of GO-loaded formulation was investigated in vitro using normal African green monkey kidney fibroblast cells (Vero). The effect of control and GO-loaded nanoethosomal formulation on superoxide dismutase (SOD) and malondialdehyde (MDA) content of rat skin was also probed. Furthermore, the effect of GO-loaded nanoethosomes on skin wrinkle improvement was studied by dermoscopic and histological examination on healthy humans and UV-irradiated rats, respectively.

Results: The optimized nanoethosomal formulation showed promising characteristics including narrow size distribution 0.17?±?0.02, mean diameter of 98.9?±?0.05?nm, EE% of 97.12?±?3.62%, LC% of 13.87?±?1.36% and zeta potential value of –15.1?±?0.9?mV. The XRD results confirmed uniform drug dispersion in the nanoethosomes structure. In vitro and in vivo antioxidant studies confirmed the superior antioxidant effect of GO-loaded nanoethosomal formulation compared with control groups (blank nanoethosomes and GO suspension).

Conclusions: Nanoethosomes was a promising carrier for dermal delivery of GO and consequently had superior anti-aging effect.     

The effect of grinding media on suspensions,microstructures, and comprehensive electrical properties of ZnO varistors

Journal of Materials Science: Materials in Electronics - The aim of this work is to find a proper grinding medium that produce the best suspension of additives in order to fabricated ZnO varistors...     

Coupled Quantity-Quality Simulation-Optimization Model for Conjunctive Surface-Groundwater Use

Many water resources optimization problems involve conflicting objectives which the main goal is to find a set of optimal solutions on, or near to, Pareto front. In this study a multi-objective water allocation model was developed for optimization of conjunctive use of surface water and groundwater resources to achieve sustainable supply of agricultural water. Here, the water resource allocation model is based on simulation-optimization (SO) modeling approach. Two surrogate models, namely an Artificial Neural Network model for groundwater level simulation and a Genetic Programming model for TDS concentration prediction were coupled with NSGA-II. The objective functions involved: 1) minimizing water shortage relative to the water demand, 2) minimizing the drawdown of groundwater level, and 3) minimizing the groundwater quality changes. According to the MSE and R² criteria, the results showed that the surrogate models for prediction of groundwater level and TDS concentration performed favorably in comparison to the measured values at the number of observation wells. In Najaf Abad plain case study, the average drawdown was limited to 0.18 m and the average TDS concentration also decreased from 1257 mg/lit to 1229 mg/lit under optimal conditions.